NIUNIU describe 1. Main features: 50g / 0.001g 2. Nominal value: 0.003g, repeatability: 0.002g, resolution: 0.001G (Key indicator: When the weight of the object with a load of 0.001G is greater than 0.003G or more, it can be identified by LCD.) 3. Ruler size: 144x84.5x51mm 4. LCD (blue backlight) size: 375x15.5mm 5. Battery: 2**AAA (not included) 6. Low battery alarm: Lo 7. Platform size: diameter 32mm (including stainless steel plate) 2. Function buttons and descriptions 1. ON/OFF (power on/off) Put the battery into the battery compartment of the scale, place the scale on a firm and flat table without wind and vibration, and keep the air bubble in the center of the black circle. Turning ON/OFF will show 88888 then 0.000and it's ready to work. Press ON/OFF to turn off the scale. If there is wind while weighing, lower the windshield. 2.UNIT (unit switch button) PressUNITto switch weighing unit: g/oz/gn/ct/t/ozt Press and holdUNITkey for 4 seconds, all units are turned on, drive OZ flashes, then press PCS and long press Or turn off the machine, press UNIT to select the next drive,the g drive cannot be turned off. Press and hold [UNIT] for 4 seconds to restore the normal weighing state. 3.TARE Touch [TARE] a to reset to zero. 4. PCS (counting function) selects 25 samples (or 50, 75, 100 samples) In normal weighing state, put the sample on the scale, then press PCS for 4 seconds, the scale displays the sample weight, press PCS to confirm, the LCD will Displays PCS + samplevalues. You can put more items and the scale will show "PCS XXX" which is the number of items. 3. Calibration function Turn on the balance, press and hold the ON/OFF button for 4 seconds, the balance will display 0 and then the weight value (if the capacity is 30g, 30000 will flash), put the 30g calibration weight on it and display PASS, then thecalibration is completed. (The product contains 20g calibration weight, you can press PCS to reduce the weight value to 20g, and then enter the 20g weight for calibration), when the calibration value flashes, press UNIT to increase the value, andpress the PCS key to decrease the value. According to the increase or decrease of 10G, we can choose the appropriate calibration weight, and the system will remember the last setting operation. Four. Automatic shutdown setting to turn off the scale, long press ON/OFF for 4 seconds to display 88888 and F1-1, press UNIT to select the correct startup time (0 to 5), 0 = no automatic shutdown, 1-5 means that the scale will Automatic shut-down. Ifnecessary, you can choose the right moment. After the setup is complete, the scale can work normally. Five, matters needing attention 1. This product is a precision measuring instrument. Please pay attention to the operation 2. Put the scale on a firm and flat table, no wind or vibration, keep the air bubble in the center of the black circle 3. To use the scale in a windless environment, place the windshield in the wind. 4. The scale should be more than 50cm away from the mobile phone. 5. Please calibrate when the weight environment changes, even if the temperature changes by only 1 degree. 6. FULL will be displayed when overloaded. 7. Do not use this product in a humid environment. When not in use, remove the battery and store it in a cool, dry place. 8. Do not use aggressive cleaners to clean the product. Quantity shipped: 1 piece Package Contents: Only the above package contents, excluding other products. Size: 137*86*48mm (Reminder: The size is measured by hand, please allow 1-2 cm measurement error) Colour: Black (Due to different monitors and lighting effects, the actual color of the product may be slightly different from the picture color.)
NIUNIU describe 1. Main features: 50g / 0.001g 2. Nominal value: 0.003g, repeatability: 0.002g, resolution: 0.001G (Key indicator: When the weight of the object with a load of 0.001G is greater than 0.003G or more, it can be identified by LCD.) 3. Ruler size: 144x84.5x51mm 4. LCD (blue backlight) size: 375x15.5mm 5. Battery: 2**AAA (not included) 6. Low battery alarm: Lo 7. Platform size: diameter 32mm (including stainless steel plate) 2. Function buttons and descriptions 1. ON/OFF (power on/off) Put the battery into the battery compartment of the scale, place the scale on a firm and flat table without wind and vibration, and keep the air bubble in the center of the black circle. Turning ON/OFF will show 88888 then 0.000and it's ready to work. Press ON/OFF to turn off the scale. If there is wind while weighing, lower the windshield. 2.UNIT (unit switch button) PressUNITto switch weighing unit: g/oz/gn/ct/t/ozt Press and holdUNITkey for 4 seconds, all units are turned on, drive OZ flashes, then press PCS and long press Or turn off the machine, press UNIT to select the next drive,the g drive cannot be turned off. Press and hold [UNIT] for 4 seconds to restore the normal weighing state. 3.TARE Touch [TARE] a to reset to zero. 4. PCS (counting function) selects 25 samples (or 50, 75, 100 samples) In normal weighing state, put the sample on the scale, then press PCS for 4 seconds, the scale displays the sample weight, press PCS to confirm, the LCD will Displays PCS + samplevalues. You can put more items and the scale will show "PCS XXX" which is the number of items. 3. Calibration function Turn on the balance, press and hold the ON/OFF button for 4 seconds, the balance will display 0 and then the weight value (if the capacity is 30g, 30000 will flash), put the 30g calibration weight on it and display PASS, then thecalibration is completed. (The product contains 20g calibration weight, you can press PCS to reduce the weight value to 20g, and then enter the 20g weight for calibration), when the calibration value flashes, press UNIT to increase the value, andpress the PCS key to decrease the value. According to the increase or decrease of 10G, we can choose the appropriate calibration weight, and the system will remember the last setting operation. Four. Automatic shutdown setting to turn off the scale, long press ON/OFF for 4 seconds to display 88888 and F1-1, press UNIT to select the correct startup time (0 to 5), 0 = no automatic shutdown, 1-5 means that the scale will Automatic shut-down. Ifnecessary, you can choose the right moment. After the setup is complete, the scale can work normally. Five, matters needing attention 1. This product is a precision measuring instrument. Please pay attention to the operation 2. Put the scale on a firm and flat table, no wind or vibration, keep the air bubble in the center of the black circle 3. To use the scale in a windless environment, place the windshield in the wind. 4. The scale should be more than 50cm away from the mobile phone. 5. Please calibrate when the weight environment changes, even if the temperature changes by only 1 degree. 6. FULL will be displayed when overloaded. 7. Do not use this product in a humid environment. When not in use, remove the battery and store it in a cool, dry place. 8. Do not use aggressive cleaners to clean the product. Quantity shipped: 1 piece Package Contents: Only the above package contents, excluding other products. Size: 137*86*48mm (Reminder: The size is measured by hand, please allow 1-2 cm measurement error) Colour: Black (Due to different monitors and lighting effects, the actual color of the product may be slightly different from the picture color.)
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.